 |
|
HALCON Embedded 9.0.1 Documentation for Windows XP Embedded on Sony XCI-SX1, XCI-V3, XCI-SX100, and XCI-V100
- To install HALCON 9.0 on the Sony XCI-SX1, XCI-V3,
XCI-SX100, and XCI-V100 insert the
HALCON 9.0 product DVD in a PC which is connected via
ethernet to the camera.
- After booting the camera, log in as administrator
on the camera and select the DVD drive of the PC as a network
drive. If the DVD drive is not visible you must enable the
sharing of the drive.
- Execute the program Setup.exe located
in the directory install-windows of
the DVD.
- From that point on, follow the instructions in the chapter
"Installing HALCON for the First Time" of the
HALCON Installation Guide. In most cases the Runtime
installation is the appropriate choice for the
installation type. You should neither install the
dongle driver nor the floating license server.
- For the XCI-SX100 and XCI-V100 cameras, please additionally
download and install the corresponding HALCON SonyXCI-2 acquisition interfaces from the
HALCON
download area.
- You can also download the HALCON 9.0.1 release from the
HALCON
download area. You must download the version
HALCON 9.0.1 for Windows XP on x86 compatible PCs.
- The Windows version comes as an executable file that
contains both the setup program and the HALCON files.
You can save the executable on the CF card and then start
the installation by executing it on the camera.
- From that point on, follow the instructions in the chapter
"Installing HALCON for the First Time" of the
HALCON Installation Guide. In most cases the Runtime
installation is the appropriate choice for the
installation type. You should neither install the
dongle driver nor the floating license server.
- For the XCI-SX100 and XCI-V100 cameras, please additionally
download and install the corresponding HALCON SonyXCI-2 acquisition interfaces from the
HALCON
download area.
- You need a license to run HALCON on the
Sony XCI-SX1, XCI-V3, XCI-SX100, and XCI-V100.
The license itself is stored in a file named
license.dat and resides
in the subdirectory license of the
directory where you installed HALCON.
- You can obtain a HALCON 9.0 license from your local
HALCON Embedded distributor. The license is bound to the
host ID of the network card of the camera.
To extract the host ID of a network card open a
Windows Command Prompt and type
"lmhostid -ether".
- June 17, 2009: release of HALCON 9.0.1 (WWW).
Please see the corresponding release
notes for details.
- January 26, 2009: release of HALCON 9.0 (WWW).
Please see the corresponding release
notes for details.
|
